We have lots of articles here that will help you.
.. Later Automatic X1 machines along with X1.1, X4 and X5 take a Domel motor which has a reference number of MKM9206/3 or MKM9206-3.. That motor number is 5471.The top pulley cog has 22 teeth.
We sell both genuine and aftermarket versions of that motor that you can find.Many sellers are listing the 5212 motor as being suitable for the X1.1, X4, X5 and other models which they are not; not without some modification anyway..Similarly with the 5471 motor, some sellers are listing that are suitable for all earlier X models, which again is absolutely not the case as you have just read..
It is also important that the correct belt is fitted with your motor, and that the motor has the correct pulley cog.Again, they all look virtually identical but they are not.
The pulley cog matches the belt.
Make sure the teeth of the belt mesh perfectly with the motor pulley cog and not.However, once you are inside, you will find some star screws that are non-standard..
They are called Torx screws, or Torx Star screws, and the star screwdriver for Sebo vacuum repairs that you need looks like this..They come in all different sizes, and in Sebo vacuums for all but one application, you need this one that we sell..
If you’re stripping down a late model cylinder vacuum-driven cleaner head, you need a different one.We have an article on that.